Allis-Chalmers Model G Wartungshandbuch PDF herunterladen (Seite 28)

FLYWHEEL AND STARTER RING GEAR

)

Removal

Separate the engine from the clutch housing

and remove the clutch. Remove the starter

ring gear fr'om the flyWheel with a hammer

and punch. Remove the four bolts from the

flywheel.

Inspection

It will not be necessary to remove the fly-

wheel ring gear from the flywheel unless the

starter teeth are damaged. The flywheel is

G - Z7

balanced and no drilling or machining should

be done to the flywheel. Check the clutch

surface for flatness.

AssemblY..

Heat the starter ring gear to 5500F and in-

stall on flywheel with the beveled end of the

teeth toward the flywheel end of engine. The

starter ring gear has 86 teeth and the starter

pinion has 10 teeth. Tighten the flywheel cap-

screws to SSft. pounds torque.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Keine Kommentare

Allis-Chalmers Model G Wartungshandbuch Seite 28